Get MAC of Access-point from Meraki Dashboard

If you have a number of APs in your site, use our Import Tool to easily add all the APs.

Login to Meraki dashboard by going to

Select your network, then go to and click on the required access point.

Add a Meraki Access point to Spotipo

Login to your account in Spotipo cloud portal and navigate to Meraki Aps tab.

Click on New( Add new MAC address).

Add the name and MAC address of the Access-point and save.

An Identity and Secret are generated for the MAC address.

Enable a Custom-Hosted Splash page on the Meraki Cloud

Go back to Meraki dashboard and select your network; then navigate to Wireless-> Splash page.

Select the SSID you want to configure from the SSID drop-down and select the option custom splash Page URL.

Enter the below value

Save Changes.

Configure Access Control

In the Meraki dashboard, In Wireless-> Access Control section, enable sign-on with ‘my RADIUS Server’.

Enter the below IP address as Host for both Radius servers.

Enter the secret that is available in the Meraki APs page.

Enable walled garden and add the following domains to "walled garden ranges"

Save and Wait

Remember to press Save so that all the settings will be saved in the cloud.

Please wait for 1-2 minutes for those settings to be active on the AP.

If everything is configured properly, you should be able to see Spotipo landing page when connecting to Guest WiFi network.

Did this answer your question?