How to configure UDM (PRO/SE) with Spotipo with new UI
For Spotipo to work as an external portal for your UDM, you would need a public IP for your location and make your UDM accessible over the internet. Please talk to us if you need help with this.
It's recommended to add a dedicated Admin user for spotipo access. After logging into UDM, go to Admins tab and Add User
Now create a new user with Role Administrator and Account type as Local Access Only. Provide a username and password.
Navigate to Console Settings and enable Remote Access
Create Firewall rules to allow Spotipo Servers to access your UDM
NOTE: This section explains configuring firewall with the classic Unifi firewall settings.
If you want to use Unifi's new Zone-Based Firewall, follow this article instead.
Spotipo needs to talk to your UDM to authorize Guests, get stats, etc. So it's required that your UDM is connected to the internet and is accessible to Spotipo.
If your UDM is not connected directly to the internet, please add a port forwarding rule on the ISP router for port 443 and destination as your UDM's WAN IP
If you don't have a static public IP, please enable DDNS
Having trouble with setting up Port forwarding or DDNS? These articles might help you.
Port Forwarding | DDNS
Go to Settings > Firewall and Security
Under Firewall Rules, press Create New Rule
Select Type as Internet Local
Description as spotipo_allow
Action as Accept and IPv4 Protocol as All
Leave destination IP and port Group as Any
Create a New Port/IP group
Use Spotipo_servers as the group profile name and add the below IPs used by Spotipo Servers and save it
Finally save the Firewall rule and you should see something like below in your Firewall Rules
Connect Unifi UDM Pro to Spotipo Account
Now login to your spotipo dashboard and navigate to Unifi Controller tab, and press the edit button
Select the controller type as UDM Pro.
Ensure all the points mentioned in the checkbox have been performed already.
Enter the IP of your UDM. If you don't have a static public IP, please configure DDNS and use that instead here
Provide the credentials for the local user you have created
Since UDM Pro has only a default site only, leave it as default.
Now select the SSID on which you want to enable Hotspot. Spotipo will configure Guest Policy for this SSID, press Save after selecting.
Verify that the controller is connected by returning to the Unifi controller tab, and the status shows "Online."
Add a New Admin to UDM Pro
It's recommended to add a dedicated Admin user for spotipo access. After logging into UDM, go to Admins tab and Add User
Now create a new user with Role Administrator and Account type as Local Access Only. Provide a username and password.
Enable Remote Access for your UDM
Navigate to Console Settings and enable Remote Access
Create Firewall rules to allow Spotipo Servers to access your UDM
NOTE: This section explains configuring firewall with the classic Unifi firewall settings.
If you want to use Unifi's new Zone-Based Firewall, follow this article instead.
Spotipo needs to talk to your UDM to authorize Guests, get stats, etc. So it's required that your UDM is connected to the internet and is accessible to Spotipo.
If your UDM is not connected directly to the internet, please add a port forwarding rule on the ISP router for port 443 and destination as your UDM's WAN IP
If you don't have a static public IP, please enable DDNS
Having trouble with setting up Port forwarding or DDNS? These articles might help you.
Port Forwarding | DDNS
Go to Settings > Firewall and Security
Under Firewall Rules, press Create New Rule
Select Type as Internet Local
Description as spotipo_allow
Action as Accept and IPv4 Protocol as All
Leave destination IP and port Group as Any
Create a New Port/IP group
Use Spotipo_servers as the group profile name and add the below IPs used by Spotipo Servers and save it
107.178.247.148
35.244.104.229
35.236.87.84
104.155.46.61
Finally save the Firewall rule and you should see something like below in your Firewall Rules
Connect Unifi UDM Pro to Spotipo Account
Now login to your spotipo dashboard and navigate to Unifi Controller tab, and press the edit button
Select the controller type as UDM Pro.
Ensure all the points mentioned in the checkbox have been performed already.
Enter the IP of your UDM. If you don't have a static public IP, please configure DDNS and use that instead here
Provide the credentials for the local user you have created
Since UDM Pro has only a default site only, leave it as default.
Now select the SSID on which you want to enable Hotspot. Spotipo will configure Guest Policy for this SSID, press Save after selecting.
Verify that the controller is connected by returning to the Unifi controller tab, and the status shows "Online."
Updated on: 11/02/2025
Thank you!